Click to View:

The MPC-6000 is an advanced modular fire alarm panel. It features analog/addressable detection, programming, and memory capability. It's base configuration includes one analog/addressable loop, with four notification appliance output circuits. Operating controls and indicators are mounted behind a locked cabinet door and an 80-character LCD display provides specific indications for addressable devices, while LEDs indicate general panel status.

back to top

• One intelligent Signaling Line Circuit
• SLC loop supports up to 252 addressable Inputs and signal/relay outputs (504 inputs/outputs total)
• Addressable devices are polarity insensitive
• Devices operate on standard wire-no twist or shield required
• FireSmart Application Specific fire detection
• 4 Class B/2 Class A notification appliance circuits
• Up to 6A NAC Power
• Built in strobe synchronization protocol
• 80 Character backlit LCD display
• Optional Peer-to-Peer networking using MPC-Net
• One man walk test (Silent or Audible)
• Auto Program Feature
• UP to 16 remote LCD Displays with control capabilities
• Programmable from front keypad, or Windows based PC programming software
• Maintenance and technician level passwords
• Optional internal DACT
• 2000 event history log
• Made in the USA, ISO 9001 quality crafted
• UL 864 Listed, MEA & CSFM Pending
• back to top

The main termination board mounts in the rear of the panel. The main power supply is physically contiguous with the main termination board. The MPC-6000 main termination board provides the interface for external system connections, the SLC loop interface PCB, four NAC circuits, remote signaling circuits and indicating interfaces. The front Display Board mounts on a hinged front plate, which is located behind a locked cabinet door. Displays for any number of zones are handled through this board. All normal operation is controlled from the front of the panel via membrane switches. Displays are provided by an 80-character, alphanumeric, backlit LCD display and by discrete LED indicators for major panel functions.

The 80-character LCD display is used to display event data, including alarms and troubles, supervisory identification of zone or device, and presentation of history. The menus are controlled by a set of four membrane switches com-manding the control processor. A back light is included to assure visibility in low light, but to conserve power, it is only activated during a reported event.

back to top

• Intelligent Signaling Line Circuit - The main termination board has addressable loop interface circuitry supporting one SLC loop Devices are polarity insensitive and can operate on untwisted, unshielded wire.
• Notification Appliance Circuits - The base panel has four independent NACs. Each circuit can be selected to give continuous output, one of eight sounding patterns. NACs are style Z or Y capable, without additional modules.
• Dry Contacts - Four programmable form "C" dry relay contacts are provided.
• Remote Annunciation - The MPC-6000 panel will drive up to 16 annunciators and 8 remote processors on an RS-485 communication line.
• Power Supply - A 7A, 24V nominal power supply provides all operating power to the panel for both standby and alarm conditions.

back to top

• A. Remote LCD Annunciator (RDC-2) - The remote LCD annunciator consists of a backlit 80 character, alphanumeric display, 4 menu buttons, 4 dedicated buttons for operator interaction, 6 LED indicators, and a security key switch.
• Serial Annunciator (SLU-2) - Consists of one remote processor and one annunciator driver board capable of providing 16 supervised outputs for LEDs or incandescent lamps. Expansion to drive 512 LEDs or lamps is via additional processor boards and annunciator drive boards (SLE-16).
• Serial Relay Unit (SRU-2) - Consists of remote processor and relay board which provides 8 relays with form "C" dry contacts rated at 1 amp. Expansion to 192 relays is via additional remote processor boards and relay boards (SLE-8).

back to top

• MPC-DACT - The MPC-DACT provides a dual line digital alarm communications transmitter. It's parameters are set via the control unit programming sequence. The MPC-DACT is compatible with the following formats: SIA DCS 8, SIA DCS 20, Ademco Contact ID, 3/1 1400 Hz., 3/1 2300 Hz.

back to top

• Environmental

  • Operating temperature: 32-120°F (0-49°C)
  • Relative Humidity - 85% @ 86°F
• Primary Supply

  • Primary input voltage -120 Vac (50/60 Hz.), 240 Vac (50/60 Hz.)
  • Maximum primary input current -1.3 amp @ 120 Vac
  • Secondary and Trouble Power Supply
    • 24 volt lead-acid battery with 7 AH-38 AH capacity
  • Auxiliary Power Outputs
    • Current - 0.5 amp resettable/non-resettable power outputs
  • Status System Relays
    • 4 relays rated @ 1 amp, 28 Vdc resistive
  • NAC Circuits
    • Rating per NAC circuit, 1.5A ea., 6 max.
  • Battery

    • Base cabinet will accommodate a 10 A battery set. Larger batteries will require separate enclosure

     

    back to top