INTRODUCTION
The 8710 and 8713 intelligent photoelectric smoke detectors provide reliable smoke detection to meet today’s critical life safety and property protection needs. The FireSmart series of detectors provide an extremely high degree of resistance to RFI, EMI and humidity. The FireSmart series detector utilizes a microprocessor with “on-board” EEPROM sup-porting the detectors sophisticated programming, error checking and self-diagnostic capabilities.
The 8710 is an intelligent smoke detector, the 8713 is a smoke detector with thermal assist, and the 8712 is a heat detector. The thermal sensors respond at 135o F. These devices are designed for use with the MPC-6000 and 7000 control panels and use the 8853 detector base.
DESCRIPTION
The FARADAY remote alarm lamps, models 8727C and 8727W, are designed for use with initiating devices that are concealed or otherwise not exposed to view (e.g. in false ceilings, under sub-floors, in unexposed ventilating ducts, normally locked vaults, within computer consoles, etc.). Even though the device initiating the alarm is out of sight, these remote alarm lamp assemblies will readily identify it. The 8727C is designed for mounting on a 4” octagon outlet box and the 8727W is designed for mounting on a standard single gang switch box. Although there is no mounting limitation, the 8727C is normally ceiling mounted, while the 8727W is normally mounted to a wall. The remote lamps may be placed up to 25 feet from the detector and use 14 to 18 gauge 3- conductor wire.
MOUNTING DATA
The 8727C and 8727W have screw-type terminals for ease of installation. The mounting plates of both units are off-white plastic and present an attractive, pleasing appearance that will blend with any decor.
